twitteryou tubefacebookacp

Paschal presents LOGO.3 formwork panels with integrated clamp mounting

LOGO.3 formwork panels with integrated clamp mounting. (Image source: Paschal)

Paschal has developed the LOGO.3 formwork panels with integrated clamp mounting for optimised construction site logistics

Along with ?off-the-shelf? formwork systems, Paschal offers customer-specific adaptations, such as the clamp mounting for LOGO connecting pieces.

The formwork expert says the resulting improvement in the construction site logistics has been so convincing that the clamp mounting has been supplied as standard with all LOGO.3 large-size and midi panels since February 2019.

The number of clamp mountings attached adapts to the particular need for connecting pieces. For example, formwork panels with a formwork height of 270 cm have room for three wedge clamps, while four wedge clamps can be fastened to panels with a formwork height of 340 cm.

When moving and dismantling the formwork, the connecting pieces can be placed practically on the panel, and are therefore immediately available for the next location. This process ensures shorter assembly and dismantling times.

Centrally-positioned on the middle cross profile, the clamp mountings ensure better accessibility from all sides, whatever direction panels are being formed or extended.

Formwork panels with clamp mountings can be stored and transported. The mountings, including ?parked? clamps are flush ? meaning that the formwork panels can be stacked.