In The Spotlight
Operator safety also depends on proper use of personal fall protection equipment. (Image source: Niftylift)
Niftylift's safety tech promises to improve working-at-height operations
Niftylift has said that it continues to advance safety in powered access equipment by focusing on the practical risks of working at height.
Although industry statistics show improvement in workplace incident rates, the company remains committed to driving further innovation through smarter engineering and user-friendly technology.
One of its standout developments is the ToughCage platform, which combines a reinforced steel cage with a robust, impact-resistant composite base.
This dual-layer protection not only shields the operator in the event of a collision but also absorbs impact energy to minimise damage to the machine’s boom and surrounding structures.
To tackle the challenges of working on sloped ground, Niftylift has equipped its MEWPs with Inclination Sensing technology.
While machines can travel across gradients beyond operational limits when booms are stowed, any attempt to elevate the booms on a slope triggers alarms and disables the drive function.
The booms must be lowered and the machine repositioned before operations can resume, preventing unsafe working conditions on unstable terrain.
If the basket is raised and the tilt angle becomes too steep, the machine automatically halts drive functions until safely reset.
Operator safety also depends on proper use of personal fall protection equipment.
Built-in safeguards
Niftylift addresses this with its intuitive ClipOn system, which provides red and green LED indicators and an audible alert to confirm harnesses are correctly attached before work begins.
Trapping incidents remain one of the most severe risks when working at height, especially if an operator is forced against the control panel.
In response, Niftylift introduced SiOPS (Sustained Involuntary Operation Prevention System) across all self-propelled machines.
SiOPS detects pressure on the control console, immediately halting all machine movements without waiting for a user response, allowing the operator to recover by simply pressing a flashing green reset button.
Further reinforcing safety protocols is Load Sensing technology, which monitors platform weight in real time.
If the system detects an overload, it disables all work functions until the weight is reduced. During operation, a recovery override allows the basket to be safely lowered first.
Supporting these built-in safeguards is Niftylink, a telematics solution that provides performance insights, real-time diagnostics, and access control.
Using PIN codes or RFID-enabled PAL cards, Niftylink ensures that only trained and authorised personnel can operate the machines, reinforcing on-site compliance and reducing the risk of human error.
Recognising that many incidents result from knowledge gaps, Niftylift also launched the NiftyPRO mobile app, an on-demand training and support tool for operators, fleet managers, and technicians.
With over 100 video tutorials covering machine operation, troubleshooting, and recovery procedures, the app bridges the gap between theoretical training and real-world application, making best practices easily accessible on-site and in the moment.
By combining smart safety features, operator-focused design, and accessible digital training, Niftylift offers a comprehensive approach to making work at height safer, more efficient, and better supported.
“Niftylift is synonymous with innovations in operator safety, introducing technologies over the years that have redefined safety standards, addressing critical risks in working at height, including entrapment, overloading, harness misuse, and unsafe tilting,” said Tom Hadden, technical sales manager, Niftylift. ‘Together, they enhance operational efficiency and provide operators with the confidence they need to work safely at height. We are committed to continuing to lead the industry in promoting safer working practices worldwide.”
Also read: Niftylift's real-time harness safety compliance in access platforms
Masdar and Iberdrola expand offshore wind portfolio in Europe. (Image source: Masdar)
Masdar and Iberdrola expand offshore wind portfolio in Europe
Masdar and Iberdrola have achieved two major milestones as part of their US$16.35bn strategic clean energy alliance: a US$5.67bn co-investment in the UK’s East Anglia THREE offshore wind farm and the full energisation of their 476MW Baltic Eagle project in Germany.
The East Anglia THREE project marks one of the largest offshore wind transactions of the decade, with Masdar and Iberdrola each holding a 50% stake and shared governance. Located off the Suffolk coast, the 1.4GW wind farm is expected to begin operations in Q4 2026, providing clean electricity to 1.3 million homes.
A US$5.25bn project finance facility has been secured from 24 international banks, oversubscribed by 40%, highlighting strong investor confidence. The project benefits from a 15-year Contract for Difference (CfD) and a Power Purchase Agreement with Amazon signed in 2024.
In Germany, the Baltic Eagle offshore wind farm has now been fully energised. As the first completed project under the Masdar–Iberdrola partnership, it will supply around 475,000 households with clean energy and eliminate approximately 800,000 tonnes of CO₂ emissions annually. Located in the Baltic Sea, the 476MW wind farm is part of Iberdrola’s Baltic Hub, which also includes Wikinger and the planned Windanker project.
These developments strengthen the partnership’s goal to triple global renewable energy capacity by 2030, while supporting Europe’s offshore wind targets and advancing energy transition goals across the UK, Germany and beyond.
Signalling an Emirati-European partnership
HE Dr. Sultan Al Jaber, UAE Minister of Industry and Advanced Technology and Chairman of Masdar, said, "Masdar and Iberdrola are continuing to forge one of the largest and most powerful strategic clean energy partnerships to accelerate capacity growth in Europe and worldwide. Offshore wind will play a crucial role in the global energy transformation, and landmark developments like Baltic Eagle and East Anglia THREE are significant advances towards clean energy targets in major European nations. With demand surging due to exponential AI growth and the rise of emerging markets, projects such as these have never been more critical."
Ignacio Galán, Iberdrola’s executive chairman, said, "Today is an important landmark in our global partnership with Masdar. Partnerships such as this one are vital in accelerating energy security and competitiveness and working towards delivering ambitious climate targets. With Masdar, we have a partner who shares our vision and commitment.
Joining forces with Masdar in the East Anglia THREE offshore windfarm will allow Iberdrola to accelerate our strategic focus on the UK, where we are investing £24bn to 2028 in transmission and distribution networks and in renewable energy, contributing to the delivery of the UK Government’s ambitious electrification plans. The completion of Baltic Eagle represents a new milestone in our partnership, reinforcing Iberdrola’s commitment to electrification and strengthening our presence in the Baltic Sea."
Mohamed Jameel Al Ramahi, chief executive officer of Masdar, said, "This landmark partnership underscores our commitment to driving Europe’s energy transformation and advancing global climate goals. Our strategic co-investments with Iberdrola in East Anglia THREE and Baltic Eagle demonstrate how ambitious cross-border partnerships can deliver transformative impact at scale. Together, we are setting a new benchmark for offshore wind collaboration, and we are looking forward to deepening this partnership as Europe accelerates its renewable energy targets."
Also read: Aed Energy secures investment to scale thermal storage in MENA
Tadweer and BEEAH will now combine forces. (Image source: Tadweer)
Tadweer acquires Masdar’s stake in Sharjah waste-to-energy plant
Abu Dhabi Future Energy Company PJSC, Masdar has announced the divestment of its stake in the Sharjah Waste-to-Energy plant, pending customary closing conditions, to Tadweer Group.
The strategic move will see Tadweer join BEEAH as a joint venture partner in Emirates Waste-to-Energy, which owns and operates the facility.
The transition allows Masdar to concentrate on scaling its clean energy portfolio, while Tadweer sharpens its focus on local and global waste management ventures.
Tadweer and BEEAH will now combine forces to manage and expand the Sharjah Waste-to-Energy plant, including plans to double its power generation from 30 MW to 60 MW and significantly boost waste processing capacity.
Inaugurated in 2022, the plant is the Middle East’s first commercial-scale waste-to-energy facility and plays a central role in the UAE’s strategy to divert waste from landfills and generate low-carbon electricity.
The agreement reinforces all partners’ commitment to sustainability, with continued collaboration expected on initiatives that support the UAE’s clean energy goals and broader climate agenda.
Mohamed Jameel Al Ramahi, chief executive officer of Masdar, said, “We are proud of the impact this project has had within the UAE, and we extend our sincere thanks to BEEAH for their valued partnership since the inception of our Emirates Waste-to-Energy joint venture. As we transfer our stake, we are confident that Tadweer and BEEAH will continue to advance the project with strong leadership and a clear strategic vision.”
Ali Al Dhaheri, managing director and chief executive officer of Tadweer Group, said, “Acquiring this high-performing asset will further enhance Tadweer Group’s capabilities and support the UAE’s ambition to become a global leader in sustainable waste management and energy conversion. We look forward to working with BEEAH to build on the strong foundations it has laid working alongside Masdar.”
Khaled Al Huraimel, group CEO of BEEAH Group, said, “We thank Masdar for having partnered with us in the Emirates Waste-to-Energy joint venture and their support on the Sharjah Waste-to-Energy Plant, our inaugural, groundbreaking project. We look forward to further building on these accomplishments alongside Tadweer Group as a joint venture partner, marking a new chapter of growth and waste-to-energy innovation for the nation and the region.”
Also read: UAE Council launches national waste exchange platform
New Iveco vehicles at the Madrid truck plant (Image source: Iveco)
Iveco celebrates 50 years
A major focus is on improving energy efficiency, particularly through smarter cooling.
Is the GCC leading in sustainable construction?
The International Code Council (ICC) looks at how the construction landscape in the GCC is changing, especially with smarter materials, cooling, and policy changes.
Behind the GCC's towering structures and landmark megaprojects lies a critical question: how can the region build in a way that is not only transformative but also sustainable?
As urbanisation intensifies, construction is under mounting pressure to evolve. Sustainability is no longer optional, it is essential. The choices made today will shape the resilience and livability of tomorrow’s cities.
To meet this challenge, governments and developers across the region are actively rethinking how buildings are designed, constructed and operated.
From low-carbon materials to pioneering technologies and updated regulations, the GCC is making bold moves to create a greener built environment.
A major focus is on improving energy efficiency, particularly through smarter cooling.
In a region where air conditioning can account for up to 70% of a building’s energy use, upgrading HVAC systems is both an environmental and financial imperative.
This has spurred the adoption of passive cooling techniques, better insulation, and demand-driven systems powered by renewables, enabling climate control with a lighter carbon footprint.
Green materials
The materials used in construction are also undergoing a transformation.
Concrete, long the backbone of GCC development, is now being refined with low-carbon alternatives and advanced admixtures to reduce emissions without compromising strength or durability.
This shift is being accelerated through regional standardisation and innovation in cement technology.
In parallel, the GCC, particularly the UAE, is leading a global push toward 3D-printed buildings.
These structures reduce material waste, speed up project timelines, and allow for complex, custom designs. They represent a fundamental reimagining of how construction can be more efficient, scalable and sustainable.
Underpinning these efforts are national climate policies like the UAE Net Zero 2050 and Saudi Arabia’s Vision 2030 and Green Initiative.
These frameworks are driving practical action, not just policy statements, supported by updated building codes and new training pathways for professionals.
Programmes from bodies such as the International Code Council (ICC) are equipping the workforce with the skills needed to meet increasingly ambitious environmental standards.
The GCC’s approach to sustainable construction is comprehensive: it combines innovation, policy, and people. In doing so, the region is not just keeping pace with global trends, it is setting new ones.
Through its commitment to smarter, cleaner, and more responsible building, the GCC is demonstrating that environmental stewardship and architectural progress can, and must, go hand in hand.
Also read: ICC to showcase global building safety standards in Egypt
EGA is also constructing the UAE’s largest aluminium recycling plant at Al Taweelah. (Image source: EGA)
EGA to boost US aluminium supply with new smelter
Emirates Global Aluminium (EGA), the world’s largest producer of premium aluminium, has commenced production at its expanded Spectro Alloys aluminium recycling facility in Minnesota, USA.
The first phase of the expansion adds 55,000 tonnes of secondary billet production capacity, with full ramp-up expected by the first quarter of 2026. Once fully operational, the site will produce 165,000 tonnes of recycled aluminium billets and ingots annually.
The output from the expanded facility will be marketed under EGA’s RevivAL brand, which represents the company’s portfolio of recycled aluminium products. With this development, EGA’s total global recycling capacity now stands at 195,000 tonnes per year, combining operations in the US and Germany.
EGA is also constructing the UAE’s largest aluminium recycling plant at Al Taweelah. Set to produce 170,000 tonnes of billets annually, the facility is on track to begin operations in the first half of 2026, reinforcing EGA’s commitment to advancing sustainable aluminium production across its global network.
Addressing the global supply chain gap
Demand for recycled aluminium in the United States is projected to reach approximately 7.6 million tonnes annually by 2033, according to independent analysts at CRU. As the second largest market for recycled aluminium globally, the US plays a significant role in the transition toward more sustainable materials.
Aluminium recycling consumes up to 95% less electricity compared to primary production, resulting in dramatically lower greenhouse gas emissions. To meet growing domestic demand, Emirates Global Aluminium (EGA) is advancing plans to establish the first new primary aluminium smelter in the US since 1980. The proposed facility, to be located in Oklahoma, is expected to produce 600,000 tonnes of aluminium per year, nearly doubling the country’s current output.
At present, around 85% of aluminium used by US industries such as automotive, aerospace and construction is imported. EGA’s planned investment aims to address this gap by strengthening domestic supply chains. In 2024, EGA also expanded its recycling footprint in the US with the acquisition of an 80% stake in EGA Spectro Alloys.
Abdulnasser Bin Kalban, chief executive officer of Emirates Global Aluminium, said, “Reaching first hot metal at the expansion of EGA Spectro Alloys is another milestone in our drive to build a global aluminium recycling business to meet growing demand for this low carbon metal. It is also a milestone in EGA’s growth in the United States, already one of our most important markets and where we are progressing our plans to build a primary aluminium production plant in Oklahoma.”
You may be interested in:
EGA advances next-gen smelting with EX technology
How are manufacturers adopting GenAI?
How are UAE industries transforming through intelligent technologies?
It is expected to launch in the second half of 2025. (Image source: Siemens)
Siemens and Microsoft join forces to simplify building IoT integration
Siemens Smart Infrastructure has partnered with Microsoft to enhance access to building IoT data through greater interoperability between Siemens’ digital building platform, Building X, and Microsoft’s Azure IoT Operations, powered by Azure Arc.
This collaboration aims to simplify how organisations connect, manage, and analyse data from various building systems such as HVAC, valves, and actuators, enabling faster onboarding and improved operational insights.
By combining Building X with Microsoft’s adaptive cloud framework, large enterprises across sectors like commercial real estate, data centres, and education can now tap into real-time data such as temperature, pressure, and indoor air quality directly in the cloud.
This paves the way for in-house applications like energy monitoring and space utilisation, supporting more efficient and sustainable building management.
Advancing digitalisation
The integration is built on open standards like the World Wide Web Consortium’s Web of Things (WoT) and the OPC Unified Architecture (OPC UA), ensuring interoperability and flexibility beyond proprietary ecosystems. Customers benefit from a simplified, vendor-neutral IoT architecture, reinforcing a shared commitment to openness, accessibility, and data security.
Expected to launch in the second half of 2025, the solution is one of the first to offer cross-provider IoT data integration based purely on open standards. It is part of Siemens Xcelerator, Siemens’ open digital platform designed to accelerate digital transformation in the built environment.
“This collaboration with Microsoft reflects our shared vision of enabling customers to harness the full potential of IoT through open standards and interoperability,” said Susanne Seitz, CEO, Siemens Smart Infrastructure Buildings. “The improved data access will provide portfolio managers with granular visibility into critical metrics such as energy efficiency and consumption. With IoT data often being siloed, this level of transparency is a game-changer for an industry seeking to optimise building operations and meet sustainability targets.”
“Siemens shares Microsoft’s focus on interoperability and open IoT standards. This collaboration is a significant step forward in making IoT data more actionable,” said Erich Barnstedt, senior director & architect, Corporate Standards Group, Microsoft. “Microsoft’s strategy underscores our commitment to partnering with industry leaders to empower customers with greater choice and control over their IoT solutions.”
Also read: Abu Dhabi aims to boost infrastructure with Plenary Group
The Mining Show
Venue:
Festival Arena
Dubai, UAE
Dates:
17 - 18 November 2025
Website:
Masdar and Iberdrola expand offshore wind portfolio in Europe. (Image source: Masdar)
Masdar and Iberdrola expand offshore wind portfolio in Europe
Masdar and Iberdrola have achieved two major milestones as part of their US$16.35bn strategic clean energy alliance: a US$5.67bn co-investment in the UK’s East Anglia THREE offshore wind farm and the full energisation of their 476MW Baltic Eagle project in Germany.
The East Anglia THREE project marks one of the largest offshore wind transactions of the decade, with Masdar and Iberdrola each holding a 50% stake and shared governance. Located off the Suffolk coast, the 1.4GW wind farm is expected to begin operations in Q4 2026, providing clean electricity to 1.3 million homes.
A US$5.25bn project finance facility has been secured from 24 international banks, oversubscribed by 40%, highlighting strong investor confidence. The project benefits from a 15-year Contract for Difference (CfD) and a Power Purchase Agreement with Amazon signed in 2024.
In Germany, the Baltic Eagle offshore wind farm has now been fully energised. As the first completed project under the Masdar–Iberdrola partnership, it will supply around 475,000 households with clean energy and eliminate approximately 800,000 tonnes of CO₂ emissions annually. Located in the Baltic Sea, the 476MW wind farm is part of Iberdrola’s Baltic Hub, which also includes Wikinger and the planned Windanker project.
These developments strengthen the partnership’s goal to triple global renewable energy capacity by 2030, while supporting Europe’s offshore wind targets and advancing energy transition goals across the UK, Germany and beyond.
Signalling an Emirati-European partnership
HE Dr. Sultan Al Jaber, UAE Minister of Industry and Advanced Technology and Chairman of Masdar, said, "Masdar and Iberdrola are continuing to forge one of the largest and most powerful strategic clean energy partnerships to accelerate capacity growth in Europe and worldwide. Offshore wind will play a crucial role in the global energy transformation, and landmark developments like Baltic Eagle and East Anglia THREE are significant advances towards clean energy targets in major European nations. With demand surging due to exponential AI growth and the rise of emerging markets, projects such as these have never been more critical."
Ignacio Galán, Iberdrola’s executive chairman, said, "Today is an important landmark in our global partnership with Masdar. Partnerships such as this one are vital in accelerating energy security and competitiveness and working towards delivering ambitious climate targets. With Masdar, we have a partner who shares our vision and commitment.
Joining forces with Masdar in the East Anglia THREE offshore windfarm will allow Iberdrola to accelerate our strategic focus on the UK, where we are investing £24bn to 2028 in transmission and distribution networks and in renewable energy, contributing to the delivery of the UK Government’s ambitious electrification plans. The completion of Baltic Eagle represents a new milestone in our partnership, reinforcing Iberdrola’s commitment to electrification and strengthening our presence in the Baltic Sea."
Mohamed Jameel Al Ramahi, chief executive officer of Masdar, said, "This landmark partnership underscores our commitment to driving Europe’s energy transformation and advancing global climate goals. Our strategic co-investments with Iberdrola in East Anglia THREE and Baltic Eagle demonstrate how ambitious cross-border partnerships can deliver transformative impact at scale. Together, we are setting a new benchmark for offshore wind collaboration, and we are looking forward to deepening this partnership as Europe accelerates its renewable energy targets."
Also read: Aed Energy secures investment to scale thermal storage in MENA
Tadweer and BEEAH will now combine forces. (Image source: Tadweer)
Rolls-Royce powers Duisburg Terminal with world’s first 100% hydrogen CHP energy system. (Image source: mtu solutions)
The Construction Authority for Potable Water and Wastewater in Egypt.
Acciona's role in the future of wastewater treatment in Egypt
ACCIONA, along with local firm DHCU, obtained an €35mn (US$38.15mn) contract from Egypt’s Construction Authority for Potable Water and Wastewater (CAPW) so it can operate and maintain Phase II of Cairo's Gabal El Asfar wastewater treatment complex.
The eight-year agreement rehabilitates also upgrades two major plants within the facility so that they can each treat 500,000 m³ per day.
Gabal El Asfar is known to be the largest wastewater treatment complex located in Africa as well as the Middle East. This ranks it third globally, with a total capacity of 2.5 m³ per day.
Home to more than eight million residents, it serves the vital eastern part of Cairo.
ACCIONA’s already established footprint is further reinforced by this latest contract within Egypt’s water sector.
The company led the design, construction, and commissioning in a previous expansion phase at Gabal El Asfar in 2013, adding another 500,000 m³ to its daily capacity.
ACCIONA and DHCU were entrusted not too long ago in 2022 for Phase I's operation and improvement that handles 1.5 m³ of wastewater for each day.
Other developments
Beyond Gabal El Asfar, ACCIONA has partnered together with CAPW on additional projects, and this includes the water infrastructure operations for New Cairo.
The initiative collects water from the Nile River and then transports the water. It then purifies the water and distributes to consumers in the satellite city 30 kilometers east of the capital.
The company constructed five other major drinking water treatment plants throughout Egypt.
The Almerya, Rod el Farag, Mostorod, North Helwan I, and North Helwan II plants serve collectively over six million people because they have a combined capacity that exceeds 600,000m³ per day.
Within ACCIONA’s portfolio is the Bahr Al Baqr wastewater treatment plant. It is actually another key project that is located in northwestern Egypt.
It has 5.6 m³ capacity as one of the world’s largest, designed for high-quality water production for agricultural irrigation.
Additionally, ACCIONA operates several other wastewater facilities in Egypt as these facilities include those located in Abnoub-El Fath, Sodfa-El Ghanayem, El Ayat, and Abu Simbel.
Sustainable infrastructure and renewable solutions are led by ACCIONA globally.
They have been keeping to carbon neutrality since back in 2016.
Operations are maintained in more than 40 countries, also the company reported €19.19bn (US$21bn) in sales for 2024.
Also check out:
MENA platform aims to enhance clean water accessibility
Water diplomacy: how UAE supports island nations' water security
Iheb Triki and Mohamed Ali Abid founded Kumulus in 2021. (Image source: Kumulus)
Sri Lanka's water management challenges have drawn international attention. (Image source: Alain Charles Publishing)
Operator safety also depends on proper use of personal fall protection equipment. (Image source: Niftylift)
Niftylift's safety tech promises to improve working-at-height operations
Niftylift has said that it continues to advance safety in powered access equipment by focusing on the practical risks of working at height.
Although industry statistics show improvement in workplace incident rates, the company remains committed to driving further innovation through smarter engineering and user-friendly technology.
One of its standout developments is the ToughCage platform, which combines a reinforced steel cage with a robust, impact-resistant composite base.
This dual-layer protection not only shields the operator in the event of a collision but also absorbs impact energy to minimise damage to the machine’s boom and surrounding structures.
To tackle the challenges of working on sloped ground, Niftylift has equipped its MEWPs with Inclination Sensing technology.
While machines can travel across gradients beyond operational limits when booms are stowed, any attempt to elevate the booms on a slope triggers alarms and disables the drive function.
The booms must be lowered and the machine repositioned before operations can resume, preventing unsafe working conditions on unstable terrain.
If the basket is raised and the tilt angle becomes too steep, the machine automatically halts drive functions until safely reset.
Operator safety also depends on proper use of personal fall protection equipment.
Built-in safeguards
Niftylift addresses this with its intuitive ClipOn system, which provides red and green LED indicators and an audible alert to confirm harnesses are correctly attached before work begins.
Trapping incidents remain one of the most severe risks when working at height, especially if an operator is forced against the control panel.
In response, Niftylift introduced SiOPS (Sustained Involuntary Operation Prevention System) across all self-propelled machines.
SiOPS detects pressure on the control console, immediately halting all machine movements without waiting for a user response, allowing the operator to recover by simply pressing a flashing green reset button.
Further reinforcing safety protocols is Load Sensing technology, which monitors platform weight in real time.
If the system detects an overload, it disables all work functions until the weight is reduced. During operation, a recovery override allows the basket to be safely lowered first.
Supporting these built-in safeguards is Niftylink, a telematics solution that provides performance insights, real-time diagnostics, and access control.
Using PIN codes or RFID-enabled PAL cards, Niftylink ensures that only trained and authorised personnel can operate the machines, reinforcing on-site compliance and reducing the risk of human error.
Recognising that many incidents result from knowledge gaps, Niftylift also launched the NiftyPRO mobile app, an on-demand training and support tool for operators, fleet managers, and technicians.
With over 100 video tutorials covering machine operation, troubleshooting, and recovery procedures, the app bridges the gap between theoretical training and real-world application, making best practices easily accessible on-site and in the moment.
By combining smart safety features, operator-focused design, and accessible digital training, Niftylift offers a comprehensive approach to making work at height safer, more efficient, and better supported.
“Niftylift is synonymous with innovations in operator safety, introducing technologies over the years that have redefined safety standards, addressing critical risks in working at height, including entrapment, overloading, harness misuse, and unsafe tilting,” said Tom Hadden, technical sales manager, Niftylift. ‘Together, they enhance operational efficiency and provide operators with the confidence they need to work safely at height. We are committed to continuing to lead the industry in promoting safer working practices worldwide.”
Also read: Niftylift's real-time harness safety compliance in access platforms
Powering North African infrastructure growth (Image source: Zoomlion)
A major focus is on improving energy efficiency, particularly through smarter cooling.
he transaction was completed under a binding share purchase and subscription agreement.
Alcoa exits Ma’aden joint venture in US$1.35bn deal
Alcoa Corporation has finalised the sale of its 25.1% stake in the Ma’aden joint venture to Saudi Arabian Mining Company (Ma’aden), marking a strategic exit from the integrated mining complex the two companies launched in 2009.
The transaction was completed under a binding share purchase and subscription agreement.
In exchange, Alcoa received around 86 million Ma’aden shares, valued at approximately US$1.2bn, alongside US$150mn in cash, which will primarily be used to cover taxes and transaction costs.
The company expects to report a gain of roughly US$780mn under other income for the third quarter of 2025.
In line with past asset sales, this gain will be recorded as a special item.
Saudi mining growth
Alcoa, which is based in Pittsburgh in Pennsylvania, is a global leader in bauxite, alumina, and aluminium products. It will now hold an estimated 2% of Ma’aden’s outstanding shares.
As stipulated in the agreement, these shares must be retained for a minimum of three years, with one-third eligible for sale after each of the third, fourth, and fifth anniversaries of the transaction’s closing.
However, under certain conditions, Alcoa is allowed to hedge or borrow against the shares during the holding period, and the lock-up may be reduced in specific scenarios.
The Ma’aden joint venture, established as a fully integrated aluminium production complex in Saudi Arabia, comprises the Ma’aden Bauxite and Alumina Company (MBAC) and the Ma’aden Aluminium Company (MAC).
Prior to the deal, Ma’aden held a 74.9% majority stake.
Citi served as Alcoa’s exclusive financial advisor for the transaction, while legal counsel was provided by White & Case LLP.
“While today marks the end of the Joint Venture, the closing of this transaction demonstrates the initial value to our shareholders and enables visibility within Alcoa’s financials until we monetize in the future,” said William F. Oplinger, Alcoa’s president and CEO.
“I thank Ma’aden’s leadership and the Kingdom of Saudi Arabia for their partnership over the last 16 years, and we look forward to continued engagement as Ma’aden shareholders.”
Also read: Power Metallic gets licensed to explore Saudi mineral belt
Power Metallic plans to utilise historical aeromagnetic survey data
Haul Track’s robust data lets managers set fuel efficiency targets. (Image source: Rokbak)
The facility opened on 19 June 2025. (Image source: Teledyne GFD)
Teledyne GFD and IDS to launch gas sensor production in Saudi Arabia
Teledyne Gas & Flame Detection (Teledyne GFD) has partnered with Industrial Detection Solutions (IDS) to establish a 699 m² manufacturing facility in Dammam, Saudi Arabia, marking a significant step towards localising production of advanced gas detection technologies in the Kingdom.
The facility, which opened on 19 June 2025, will produce high-precision sensors used in hazardous environments such as oil and gas drilling sites, LNG/CNG plants, and petrochemical facilities.
The initiative supports Saudi Arabia’s IKTVA programme, which encourages economic diversification and local supply chain development in the energy sector.
By bringing manufacturing closer to end users and suppliers, the partnership is expected to reduce lead times and enhance safety support across the region.
More features added
Key products to be produced at the new plant include Teledyne GFD’s DM-700 toxic gas sensor, and the FP-700 and IR-700 sensors for combustible gas detection.
These ‘smart’ sensors offer non-intrusive monitoring using electrochemical, catalytic bead, and infrared technologies, with robust designs that resist common causes of failure such as water ingress, corrosion, and vibration.
“Our new partnership with Industrial Detection Solutions ensures that manufacturing is closer to both customers and suppliers, enabling even faster delivery of class-leading gas detection products in support of more efficient supply chains,” said Thomas Moeller, VP Sales & Marketing at Teledyne GFD. “The proven solutions manufactured in KSA will better serve a vast regional industry that recognises the importance of a robust and prevalent safety culture. We are proud to be part of KSA’s remarkable ongoing journey of economic and industrial growth, and we look forward to a successful future together.”
Teledyne GFD recently also introduced the PS DUO, a new portable dual-gas detector designed to improve personal safety in hazardous environments. The compact handheld device can detect two gases simultaneously using passive diffusion sensing, and features real-time monitoring with audible, visual and vibrating alarms to alert users when gas levels exceed safe limits.
The PS DUO offers a broad selection of gas combinations including carbon monoxide (CO), hydrogen sulphide (H₂S), sulphur dioxide (SO₂), ammonia (NH₃), oxygen (O₂), hydrogen (H₂), nitrogen dioxide (NO₂), and ozone (O₃). Its ATEX/IECEx rating and 2-year warranty make it ideal for industrial settings. Users can select gas pairings tailored to their specific applications, such as H₂S and SO₂, particularly relevant in Middle Eastern operations.
The detector features a bright LCD screen displaying continuous gas concentration, wireless connectivity for easy data transfer, and internal memory capable of storing 30 alarm logs. Housed in a rugged IP67-rated rubberised casing, the PS DUO is lightweight (200g), ergonomic, and designed for comfort and ease of use in demanding environments. It runs for up to two years on a single replaceable battery.
EGA is also constructing the UAE’s largest aluminium recycling plant at Al Taweelah. (Image source: EGA)
The two companies will collaborate on AI-powere autonomous operations. (Image source: Borouge)
New Iveco vehicles at the Madrid truck plant (Image source: Iveco)
Iveco celebrates 50 years
Jumia opens 27,000 sq m smart warehouse to boost Egypt e-commerce logistics
The agreement aims to create a unified service model. (Image source: Maersk)
This webinar is an essential event for professionals in the construction industry. (Image source: ACP)
Volvo’s On-Board Weighing systems are designed for wheel loaders, excavators and articulated haulers. (Image source: Volvo CE)
Failing to notice and deal with safety issues can result in accidents. (Image source: Cat Lift Trucks)
Partanna Concrete pulls CO2 directly from the atmosphere over its lifecycle while avoiding emissions during production. (Image source: Canva)
Scheduled for completion by the end of 2025, this facility will span a 2,400 sq m. (Image source: MBRAH)
The facility aligns with the UAE’s “Make it in the Emirates” initiative. (Image source: Schneider Electric)
ADIPEC 2024 is spotlighting the pivotal role of AI in the energy transition. (Image source: ACP)
The upcoming edition of bauma is scheduled for 7-13 April 2025. (Image source: bauma)
Wajdi Marroun, managing director of Versatile International. (Image source: Versatile International)
The investment also supports the development and commercialisation of UIG’s Energy Storage for Resiliency (ESR) platform. (Image source: Volvo Penta)
The agreement was signed by Suraj Thampi, Alutec’s CEO, and Martin Deil, ClearVue Technologies’ global CEO. (Image source: ClearVue)
The panel emphasised South-South collaboration. (Image source: Alain Charles Publishing)
Construction technology. (Image source: Adobe Stock)
Aviation is a key focus for Masdar's green hydrogen business. (Image source: Masdar)
Latest news
Powering North African infrastructure growth (Image source: Zoomlion)
Operator safety also depends on proper use of personal fall protection equipment. (Image source: Niftylift)
Masdar and Iberdrola expand offshore wind portfolio in Europe. (Image source: Masdar)
Tadweer and BEEAH will now combine forces. (Image source: Tadweer)
Rolls-Royce powers Duisburg Terminal with world’s first 100% hydrogen CHP energy system. (Image source: mtu solutions)
New Iveco vehicles at the Madrid truck plant (Image source: Iveco)
The facility opened on 19 June 2025. (Image source: Teledyne GFD)
A major focus is on improving energy efficiency, particularly through smarter cooling.
EGA is also constructing the UAE’s largest aluminium recycling plant at Al Taweelah. (Image source: EGA)
The collaboration is further bolstered by ADQ’s acquisition of a 49% stake in Plenary in 2024. (Image source: Abu Dhabi Media))
he five-year contract covers full-scope project management services. (Image source: Parsons)
The project will help reduce emissions in the shipping industry.
Jumia opens 27,000 sq m smart warehouse to boost Egypt e-commerce logistics
The agreement aims to create a unified service model. (Image source: Maersk)
The system offers a dynamic vertical reach of 3 metres. (Image source: COBOD)
More Articles
It is expected to launch in the second half of 2025. (Image source: Siemens)
Siemens and Microsoft join forces to simplify building IoT integration
The data centre market within the GCC is expanding rapidly. (Image source: UTEC)
Modular solutions for a future-ready Middle East: UTEC leads the charge in sustainable data centre innovation
Joby’s aircraft can carry a pilot and four passengers. (Image source: Joby)
Joby Aviation completes first piloted air taxi flights in Dubai
Ali Abdulla Kanoo, Deputy Chairman of Yusuf Bin Ahmed Kanoo (KSA) and Chairman of Kanoo Industrial & Energy. (Image source: Kanoo Energy)
Kanoo Energy showcases industrial solutions at Saudi Industry Forum
The compact handheld device can detect two gases simultaneously. (Image source: Teledyne GFD)
Teledyne GFD's new portable dual-gas detector
This next-generation seal builds on John Crane’s extensive expertise in industrial sealing. (Image source: John Crane)
John Crane unveils type 93AX seal to minimise emissions
Brady has launched a dedicated online hub focused on Electrical Identification. (Image source: Brady)
Electrical labelling made easy – explore Brady’s new online hub
More than two million Muslims flock to Mecca for the hajj.
Saudi Arabia trials AI communication services for a safer Hajj
Mark Moffat, CEO of IFS.
Driving the new wave of industrial revolution through AI
IFS will also contribute to two major panel discussions. (Image source: WUC2025)
IFS to showcase industrial AI solutions at WUC 2025
Digital shift and decarbonisation: STAMFORD | AvK responds to global energy trends. (Image source: STAMFORD | AvK)
Digital shift and decarbonisation: STAMFORD | AvK responds to global energy trends
The rollout is expected to boost both security and efficiency. (Image source: Dubai Aviation Engineering Projects)